Views: 0 Author: Site Editor Publish Time: 2026-11-11 Origin: Site
CLW Group, a specialized commercial and special-purpose vehicle manufacturer and exporter based in China, has completed a customized Dongfeng 4×2 5 CBM Stainless Steel Drinking Water Tank Truck for an overseas customer order.
The vehicle has been manufactured according to the customer's water transportation requirements and is now being prepared for shipment to Africa.
Built on a Dongfeng 4×2 truck chassis, the completed vehicle features a stainless steel water tank with a total nominal capacity of 5 cubic meters, a two-compartment tank configuration and a customized side water discharge arrangement.
Designed for drinking water transportation and distribution applications, the compact water tanker offers a practical configuration for businesses and organizations requiring moderate-volume water deliveries.
The following specifications describe the completed customer order.
Item | Specification |
|---|---|
Vehicle Type | Drinking Water Transport Tank Truck |
Chassis Brand | Dongfeng |
Drive Configuration | 4×2 |
Tank Capacity | 5 CBM (5,000 Liters) |
Tank Material | Stainless Steel |
Tank Compartments | 2 Separate Compartments |
Water Discharge | Customized Side Outlet |
Tank Structure | Reinforced Cylindrical Tank |
Exterior Appearance | Polished Stainless Steel |
Main Application | Water Transportation and Distribution |
Destination Market | Africa |
Production Status | Completed; Ready for Shipment |
The stated capacity is the nominal tank volume. Actual permitted water load depends on the vehicle's approved payload, axle loads and applicable transport regulations.
The specific stainless steel grade, internal compartment volumes and discharge equipment performance should be confirmed against the completed vehicle's technical documentation.
One of the main features of this customized water tanker is its stainless steel tank body.
The completed vehicle features a cylindrical tank with a polished metallic exterior, supported by a steel mounting structure on the Dongfeng chassis.
Stainless steel is commonly considered for applications requiring corrosion-resistant water-contact surfaces.
For drinking water transportation, the material grade and suitability of every water-contact component must be verified according to the applicable requirements.
The tank, outlet valves, seals, pipework and hoses should be selected and maintained to support appropriate water hygiene.
The completed truck also features a top access arrangement and an exterior rear ladder, providing access for designated inspection and maintenance activities.
The tank has been customized with two separate compartments according to the customer's requirements.
This configuration allows the operator to organize water transportation across two internal tank sections.
Compared with a single-compartment arrangement, separate compartments may offer additional flexibility when planning suitable loading and unloading operations.
The actual compartment capacities depend on the internal tank design.
Both compartments must be maintained under appropriate hygiene conditions when intended for drinking water transport.
Separate compartments do not guarantee water quality or remove the need for regular cleaning and disinfection.
Another important feature of this customer order is its side water discharge arrangement.
A side outlet provides a convenient connection point for water distribution equipment, depending on the final valve and hose configuration.
This design can be useful when water needs to be transferred from the tanker to an approved receiving tank or other suitable distribution point.
The photographs show external pipework and protective equipment structures mounted along the chassis.
The discharge method, flow rate, pump configuration and outlet dimensions should be confirmed using the completed vehicle's technical specification.
The completed water tanker is built on a Dongfeng 4×2 truck chassis.
This compact configuration was selected for the customer's specified tank capacity and intended operating needs.
A 4×2 water tank truck may be considered for local water delivery operations where road access, maneuverability and vehicle dimensions are important.
The final vehicle must operate within its approved gross weight, axle limits and local road regulations.
The customer's chassis selection can also be adapted to different operating environments and water transportation requirements.
The customized 5 CBM water tank truck is intended for water transportation and distribution applications.
Potential uses include:
Community Water Distribution
Transportation of water to designated community supply or storage points.
Rural Water Supply Projects
Water delivery to suitable receiving facilities in areas where centralized distribution systems are limited.
Commercial Water Delivery Services
Transportation of water for businesses operating approved bulk water supply services.
Temporary Water Supply Operations
Support for temporary water distribution arrangements when an appropriate source and operating procedure are available.
Institutional Water Supply
Delivery to suitable water storage facilities serving schools, agricultural enterprises or other organizations.
For potable water applications, the transported water must come from an appropriate source and the complete transport system must comply with applicable hygiene and water quality requirements.
CLW Group manufactures customized water tank trucks according to customers' specific operating requirements.
Available customization discussions include:
Water tank capacity and dimensions
Stainless steel grades and other suitable tank materials
Single or multiple tank compartments
Side and rear water discharge arrangements
Valves, pipework and suitable water transfer equipment
Chassis brand and configuration
Vehicle exterior color and OEM logo branding
Equipment selection based on road conditions and operating requirements
For drinking water applications, material documentation and any required food-contact or potable-water approvals should be established before the vehicle enters service.
The Dongfeng 4×2 5 CBM stainless steel drinking water tank truck has completed production and is being prepared for export shipment to Africa.
The completed vehicle has been photographed at the factory, showing its overall appearance, polished stainless steel tank, chassis configuration, external piping, rear access ladder and equipment storage structures.
This order represents another example of CLW Group's ability to provide customized water transportation vehicles for international customers.
CLW Group offers different water transportation vehicles for various commercial and municipal applications.
Customers can explore the Water Tank Truck product category for additional configurations.
For buyers seeking a larger water tanker, the ISUZU 15 CBM Water Tank Truck is another available model with a different chassis, tank capacity and technical configuration.
The related models are not identical to this customized Dongfeng 5 CBM drinking water transport truck.
If you are looking for a drinking water transport truck, stainless steel water tanker or customized water delivery vehicle, CLW Group can discuss a suitable configuration for your business.
Please share your required water tank capacity, tank material, compartment quantity, discharge system requirements and destination country.
Our team can provide available technical information and a factory quotation based on your project requirements.
CLW Group – Special-Purpose Truck Manufacturer and Exporter in China
Website: https://www.clwvehicles.com/
WhatsApp: +86 132 9725 5587
Commercial vehicle sales, customization and export inquiries only.
English
